Technical Specifications Belec Vario Lab

Belec Vario Lab - Technical Specifications

Optics
- spectrometer in Paschen-Runge mounting
- Rowland circle diameter 500 mm
- usable wavelengths 120-430 nm
- grating 3600 lines/mm
- reciprocal dispersion 0,52 nm/mm (1st order)
- shock resistance 
- photomultiplier detector systems are ±0.1°C temperature stabilised for excellent long-term stability
- optionally 2nd spectrometer optics*
- up to 11 bases and 108 measuring channels possible
- inert gas-breathed optical chamber with gas purifier system
- optional optic with usable wavelengths up to 800 nm*

Vacuum System*
- 2 stage rotary vacuum pump
- large oil separator
- oil vapor trap
- vacuum gauge in front panel

Source
- sparking generator with maximum 400 Hz frequency
- unipolar discharge
- separate parameter for pre-sparking and integration selectable via software
- ignition frequency program specifically selectable via software
- discharge power program specifically selectable via software
- arc source for air probe, optional
- ignition voltage 20 kV

Measuring Stand
- argon-flushed measuring stand for exact analysis
- sparking stand grounded with Ø 10 mm analysis opening,
- optional ceramic disc with Ø 4mm opening*
- adapters for wires, pipes and small parts are available
- low-wear tungsten electrode
- pneumatic sample clamping
- argon flow  0,1 l/min in stand-by mode and 2 l/min during analysis
- low maintenance required

Electronics (Model 2P)
- stabilized high voltage
- zero-stabilized analogue amplifier
- 6-decade dynamic A-D converter for each channel
- 48 channels with digital integration, configurable for several bases

Electronics (Model 2C)

- 15 detectors, each with 3648 pixel, 7µ pixel width
- individual AD- converter board for each detector, mounted on multi channel board,
  coupled by high-speed port
- Integrated noise suppression - integrated background compensation
- Unlimited numbers of measuring channels, configurable for several base 

Probes
- argon-flushed sparking probe for exact analysis, including carbon
- argon flow 0,1 l / min in standby and 2,5 l / min during analysis
- argon control on cable plug
- air probe for quick mix-up checking
- adapters for wires, pipes and small parts available for all probes
- lightweight shockproof plastic probe housing
- start and clear buttons easily hand-operated
- signal on mix-up identification: visual display for “repeat” and “reject”, start button is blocked until confirm
  
button is pressed
- multi fibre quartz optics, standard lengths 3m or 5m
- low-wear tungsten electrode
- silver electrode for air probe
- probe connector system

Dimensions 
- width 680 mm
- height 1135 mm
- depth 945 mm

Weight 
- analysis unit 80 kg

Power Supply
- 230V/50Hz or 110V/60Hz
- 100 W in stand-by mode 
- 600 W during analysis

with optional vacuum system
- 600 W in stand-by mode 
- 1100 W during analysis

Computer Hardware 
- System-integrated industrial computer system 
-
Intel® ATOM® single core N270 (1.66 GHz) processor
-
2 GB RAM and 2.5” Solid-State-Drive (SSD) 128GB
-
Onboard Intel® graphic 945 express with VGA output
-
  MS Windows 7 ultimate® operation system with client specific regional and language
   settings

-
Remote-Service-System (RSS) by Teamviewer®
- 18,5” widescreen colour monitor, other monitors available
-
Complete external keyboard with touch pad
-
USB 2.0 ports
-
Ethernet interface RJ 45, 100 Mbit/sec
-
Serial port
-
Parallel port

 Software 
- Belec WIN 21 analysis and quality control program
- arbitrary operating system, e.g. MS Windows 7
- Remote-Service-System*
- display of analysis values at each measurement
- as many analysis programs to customer specifications as required
- individual analysis parameters for each program
- automatic program selection (APF)*
- analysis computation with: background correction, curve position correction, additive and multiplicative
  
inter-element correction
- automatic correction with standard types
- easy and simultaneous recalibration of several programs
- mix-up checking by comparison with reference measurement
- grade checking by comparison with analysis regulations
- type calibration and type measurement
- tolerances for every analysis program and element in absolute and relative weight percentages, individually
  
adjustable
- average and standard deviation from chosen measurements
- warning signal, when calibration curve is exceeded
- automatic reminder of regular recalibration
- automatic display of quality description or material number
- alloy data bank, 100.000 qualities and more storable (only limited by computer storage capacity)
- text size on monitor variable for optimum legibility
- protocol storage function
- report memory function for later analysis, printing and archiving
- several statistic functions with graphical representation

*optional

Vacuum System*
- pump integrated in lower cabinet
- large oil separator
- oil vapour trap
- vacuum gauge in front panel

Source
- sparking generator with maximum 400 Hz frequency
- unipolar discharge
- separate parameter for pre-sparking and integration selectable via software
- ignition frequency program specifically selectable via software
- discharge power program specifically selectable via software
- arc source for air probe, optional
- ignition voltage 20 kV

Measuring Stand
- argon-flushed measuring stand for exact analysis
- sparking stand grounded with Ø 10 mm analysis opening, optionally with ceramic insert for samples of Ø 4mm minimum
- adapters for wires, pipes and small parts are available
- low-wear tungsten electrode
- pneumatic sample clamping
- argon flow  0,1 l/min in stand-by mode and 2 l/min during analysis
- low maintenance effort

Electronics
- stabilised high voltage
- zero-stabilised analogue amplifier
- 6-decade dynamic A-D converter for each channel
- 48 channels with digital integration, configurable for several bases

Probes
- argon-flushed sparking probe for exact analysis, including carbon
- argon flow 0,1 l / min in standby and 2,5 l / min when analysing
- argon control on cable socket
- air probe for quick mix-up checking
- adapters for wires, pipes and small parts available for all probes
- lightweight shockproof plastic probe housing
- start and clear buttons easily hand-operated
- signal on mix-up identification: visual display for “repeat” and “reject”, start button is blocked until confirm button is pressed
- multi fibre quartz optics, standard lengths 3m or 5m
- low-wear tungsten electrode
- silver electrode for air probe
- probe connector system

Dimensions 
- width 24.8 in. (630 mm)
- height  22.6 in. (575 mm)
- depth 27.6 in. (1220 mm)
plus 4.5 in. (155 mm) for sparking stand 

Weight 
- analysis unit 220.0 lbs. (100 kg)
- argon probe 2.1 lbs. (0,95 kg)
- special probe 2.5 lbs. (1,15 kg)
- lower cabinet 145.5 lbs. (66 kg)

Power Supply
- 230V/50Hz or 110V/60Hz
- 100 W in stand-by mode 
- 600 W during analysis

with optional vacuum system
 -600 W in stand-by mode 
- 1100 W during analysis

Computer Hardware 
- System-integrated industrial computer system 
- Intel® ATOM® single core N270 (1.66 GHz) processor
- 2 GB RAM and 2.5” Solid-State-Drive (SSD) 128GB
- Onboard Intel® graphic 945 express with VGA output
-  MS Windows 7 ultimate® operation system with client specific regional and language
   settings

- Remote-Service-System (RSS) by Teamviewer®
- 15“ internal TFT colour display
- Complete external keyboard with touch pad
- USB 2.0 ports, 2 pcs. unused
- Ethernet interface RJ 45, 100 Mbit/sec
-Serial port
- Parallel port

 

Software 
- Belec WIN 21 analysis and quality control program
- arbitrary operating system, e.g. MS Windows XP
- Remote-Service-System*
- display of analysis values at each measurement
- as many analysis programs to customer specifications as required
- individual analysis parameters for each program
- automatic program selection (APF)*
- analysis computation with: background correction, curve position correction, additive and multiplicative inter-element correction
- automatic correction with standard types
- easy and simultaneous recalibration of several programs
- mix-up checking by comparison with reference measurement
- grade checking by comparison with analysis regulations
- type calibration and type measurement
- tolerances for every analysis program and element in absolute and relative weight percentages, individually adjustable
- average and standard deviation from chosen measurements
- warning signal, when calibration curve is exceeded
- automatic reminder of regular recalibration
- automatic display of quality description or material number
- alloy data bank, 100.000 qualities and more storable (only limited by computer storage capacity)
- text size on monitor variable for optimum legibility
- protocol storage function
- report memory function for later analysis, printing and archiving
- several statistic functions with graphical representation

*optional

General Office Germany

Belec Spektrometrie Opto-Elektronik GmbH

Hamburger Str. 12
49124 Georgsmarienhütte

Tel.: +49 5401-8709-0
Fax: +49 5401-8709-28

info@i-like-no-spam.belec.de

Belec Worldwide

With it´s over 40 international representations, Belec is present all over the world.
Choose your local contact:

Durch die Nutzung dieser Webseite erklären Sie sich mit der Verwendung von Cookies einverstanden. Mehr Informationen